Good to everyone and welcome to Oklo's Second Quarter, 2024 Earnings and Business Update Webcast. At this time, all participants are in a listen only mode. Later, you will have the opportunity to ask questions during the question-and-answer session. [Operator Instructions]. Please note this call may be recorded and what I will be standing by if you should need any assistance. It is now my pleasure to turn the conference over to Mr. Sam Doane, Director of Investor Relations. Please go ahead, sir.

Thank you, operator. Good day everyone and welcome to Oklo's inaugural company update and earnings. Joining us today are Jake DeWitte Co-Founder And Chief Executive Officer, and Craig Bealmear, Chief Financial Officer. Oklo's Q2 earnings were announced after market closed today. You can find the shareholder letter and supplemental slides on the investor relations page of our website. The information discussed during the course of our remarks and the subsequent Q&A session includes forward-looking statements, which reflect our current views of existing trends and are subject to a variety of risks, assumptions, estimates, uncertainties, and other factors that could cause actual results to differ materially from such statements. You are urged to carefully read the forward-looking statements language in our shareholder letter and supplemental slides. You can find a discussion of our risk factors, which could potentially contribute to such differences in our most recent filings with the SEC. Oklo assumes no obligation to update these statements, whether as a result of new information, future events, or otherwise, except as required by law. I'll now turn the call over to Jake DeWitte, OKLO's Co-Founder and Chief Executive Officer, Jake?

Thanks, Sam, and thank you all for joining us today. I'm excited to share a quarterly update and provide some insight into the progress we've made over the past quarter. By way of introduction and a little bit of background and history in Oklo, the company was born largely out of the view that there was a significant amount of opportunity with advanced nuclear technologies. Personally, I grew up in New Mexico. I was born and raised there and born and raised around the technology accordingly. And that's where I fell in love with it from a very young age. It was something that felt like it was from science fiction, but it was actually real. The fact that you can take an atom and split it and harness the strong nuclear force and produce 50 million times more energy than a conventional hydrocarbon oxidation reaction is crazy to me. It's always been crazy to me. It still is today, but it's real. This is real technology. And it's been with us for over 80 years at this point. So I knew I wanted to work on it from a young age and I had a unique set of experiences to be around the technology. In high school, I got hired into the nuclear weapons program and I got a chance to learn a lot about it from that point. And from there, I got a chance to springboard into a number of different facets of the industry, from academic and government R&D, to licensing and procurement on the fuel enrichment side, to commercial reactor design and R&D, as well as research projects on the academic side, touching conventional large light water reactors, as well as next generation advanced reactors. Along this path, I started to see a clear picture of what I thought was the case. When I went into it, which was new technologies were going to be what ushered in some of these new areas of growth for nuclear. But that was only part of the story. In fact, it was much more oriented to fundamentally needing to do some new things in a space. What I observed was an industry that had fairly radically stagnated in how it did things and approached things. And there was a ton of opportunity to rethink about how you could approach taking new nuclear technologies to market. So that led my Co-Founder Caroline and I to think about and ultimately start a company sitting around three major pillars that we saw were really important to catalyzing significant changes and opportunities in the industry. Those centered around taking, first, a different approach on the business model, second, a different approach around the size of the reactor, and third, a different approach around technology. So to kind of pick at those things really quickly, first on the business model side, this is a really important differentiation point for us from how things have been done and are done, generally speaking, across the industry. Typically, the nuclear business model from a reactor design perspective has involved designing a reactor to about 80% or so completion, maybe designing the power plant to something between 50% and 80% completion, and then going off and trying to license out that design to your customers, asking them to then take the baton, to then complete the design, to then permit it, decide it, to build it, to own it, and to operate the plant. That puts all of the burden on the customers, and it's a highly frictional process. We found that people really wanted the wonderful attributes that nuclear power affords, so we decided to take a different approach. So early on, we took a view of asking the question. What would make it easier for people to buy what they really liked about nuclear technology? In other words, how could we make it easier for people to buy what they wanted? And so that led us to ultimately follow into an opportunity that's built on what renewables had done very well for a long time, which was to design, build, and operate the plant ourselves, and then just sell the power through power purchase agreements. That has significant benefits because it's aligned with what customers want, perhaps that's the most important thing, and we see that reflected in how our customer interest and customer order book has grown and is growing. Additionally, we also see reflected in the significant benefits that come to the company with this kind of recurring revenue model. And so those things are significantly enabling and accelerative to us as we think about how the future of nuclear needs to ultimately evolve. Additionally, we wanted to take a different angle on size. We didn't want to start at bigger size ranges like a few hundred megawatts or even a gigawatt like today's plant. Instead, we wanted to start as small as we reasonably could so that we could have a technology that could service a market of reasonable size and grow into, so not so small that it's kind of like a toy or niche system like a few hundred kilowatts or so, but actually big enough so that you can service a large market and grow into it. So we found a sweet spot at about 15 megawatts and that's allowed us to change the paradigm from needing billions of dollars to capitalize the plant and get it operational to only needing a few hundred million dollars. So that's allowed us to significantly change the paradigm to how you take new technologies to market. And finally, we took the approach on pursuing what we see as the best-in-class economic potential from a technological perspective. Specifically, we're working on what's called a liquid sodium cooled fast reactor technology. That means we use liquid sodium as the coolant. We do that because it's a technology that has a huge amount of potential with a really rich history of development behind it. As a society, we've built and operated more than 25 of these plants around the world. We've gained over 400 combined reactor years of operational experience. We've learned what works, what doesn't work, and we know how to take the technology ultimately into the market. In the U.S., we notably pursued a pathway of ultimately developing and demonstrating this technology in two meaningful ways, so in two plans. One was a plant in Washington State called the Fast Flux Test Facility, and the other was a plant in Idaho called EBR-II. At Oklo, we most directly build our lineage and legacy of the EBR-II plant, which was a just under 20 megawatt fast reactor that sold power to the grid, ran for about 30 years, demonstrated superior operating characteristics to its temporary commercial light water plant at the time, while also demonstrating the amazing features it had from an inherent and passive safety perspective that can afford plant design simplification and therefore cost reduction, as well as the ability to recycle fuel. Altogether, these are significant enabling benefits. We like sodium because it operates at high temperatures without being pressurized. It's compatible with common alloys. It allows us to tap into existing value and supply chains. And from there, we have the ability to leverage a technology that ultimately has best-of-breed economic potential in our eyes. Not only are we building on a mature technology base that's behind it, the Nuclear Regulatory Commission has had experience in sodium fast reactors. We also have peers in this space that are developing sodium fast reactors, like TerraPower, who's developing a sodium fast reactor but at a larger size. The progress made by them, the progress made by us, all gives us a pretty clear line of sight for how the NRC can review and evaluate sodium fast reactor technologies. And it has a long history of technology development and technology maturity behind it. A fun little fact is most people often talk about advanced reactors or Gen 4 reactors that's going to be milestones of the first one to do some milestone coming up. The reality is the first reactor that actually produced usable electricity in the United States was a liquid metal-cooled fast reactor named EBR-I. It was the earlier predecessor of EBR-II. And it first produced usable electric power back in 1951. So we're ultimately at Oklo very excited to build up on the legacy of this technology and stand on the shoulders of the giants who came before us that developed it to the spot where we can now move this technology forward. So specifically, we're implementing this in what we refer to as our product offering of the Aurora. The Aurora product line is designed to scale to 15 and 50 megawatt offerings today. And we're also evaluating 100 megawatt or larger offering that we're developing. The core focus of the business at this point is developing the 15 and 50 megawatt plants. They look very similar. They share the same fuel types and materials and coolant types, just slightly different sizes and packaging. And we do that because we've been focused on being responsive to where customer interest and demand has been, and that's led us to these two size points to start. This technology is basically a way to make heat. So when you split an atom, you're ultimately just producing heat that then conducts through the fuel, through the structure, and then is conductively removed by the coolant. So we use sodium as that way to move the coolant from the fuel then up to ultimately boil water. You can also use this heat product directly, which often opens the door for industrial heat processes. And we operate in a temperature range, which allows us to service the vast majority of heat markets that are available today. It also has some interesting connection points for advanced cooling technologies, which I know sounds funny, but thermal driven cooling technology has a lot of promise, especially for scaling data centers. Technologies like absorption chilling has some significant upside in the data center markets. And we're pretty excited about how that can integrate with our system. Aurora powerhouses are designed to maximize the use of materials, parts, and labor from non-nuclear supply chains. We develop and design this technology in a way to take advantage of these benefits because sodium gives us the ability to operate at high temperatures without being pressurized. It's compatible with commonly available alloys like stainless steel alloys, such as 316L and 304L, and form factors that are similar or identical to components available in other industries, such as oil and gas or food and beverage or chemical. That's great because we can then tap into existing value and supply chains to ultimately deliver these systems. The ability to utilize existing supply chain components allows us to leverage non-nuclear supply chains, which operate at much higher volumes and offer more diverse options that come at lower cost. This approach significantly enhances the economic scalability of our technology. And that's one of the reasons we're so excited about is economic potential. By leveraging the energy density of fission, Oklo's Aurora powerhouses have immense environmental benefits, that creates a pretty favorable technology platform that looks quite a bit different than what nuclear's been used to looking like, if you will. And that was a big focus of ours. We wanted to focus on something that has aesthetic appeal while also offering something that has functional benefits from a constructability perspective. So because of those benefits, the nuclear sector is receiving unprecedented support from all levels of government. This quarter has seen some pretty exciting developments, including the signing of the Advance Act, but this builds on years of significant support at a federal, at a state, and an international level. One of the big benefits legislatively for nuclear, frankly, one of the biggest in the last few decades was the passage and signing of the Advance Act. And that just happened within the last few months. This is a significant piece of legislation that drives forward support for Congress and also support from this administration that has clearly been in favor of propelling and advancing nuclear technology. It brings forward several major legislative developments and policy support levels to basically support and scale the deployment of nuclear. This includes enhancing and modernizing NRC licensing and review timelines, as well as fee structures, but also supports driving forward accelerated deployment models, creating opportunities to enhance demand signals and demand indicators from the government, as well as aligning the NRC mission towards more successful and efficient scaling of nuclear technology. There's a lot more we can talk about what the ADVANCE Act does, and we will continue to do so, but we're quite excited about what this positions the industry to be able to actually do and drive forward the deployment of new technologies going forward. Oklo is one of the most extensive regulatory engagement histories with the Nuclear Regulatory Commission, or the NRC. Accordingly, we find ourselves very well-positioned to benefit as an early mover with the regulatory side. We've been the longest engaged non-light water reactor company with the NRC, dating back to starting to work with them back in 2016. We've had several significant milestones along the path there, and are positioning ourselves to do a pre-application readiness assessment later this year, spanning into submitting our next application early in the next year, followed by subsequent applications thereafter. Oklo's integrated build, own, and operate business model enables an integrated and streamlined licensing pathway that's a bit different from what the industry does otherwise. An important feature for our business model, as well as our licensing plan, is taking advantage of a regulatory approach that allows us to do all the licensing we need to do to get a commercial operating license in one step. In other words, you can take a lot of steps to get to what you ultimately need, which is a commercial operating license. And some of our peers are taking a process where they go apply and get a construction permit. After that, they can go build the plan and then apply to get an operating license, after which, if they get the operating license, they can then commercially operate the plan. Others are taking an approach where instead of being the owner operator, they're designing the plans to get a design certification or something similar to that, like a standard design approval. Then after that, going out and then working with their potential customers who then need to go through the actual licensing process to get a commercial operating license themselves. So that means their customers still have to go get a commercial operating license, even if a reactor design company has a design certification, because that's only a piece of what you ultimately need to get a commercial license. And it's not needed to get a commercial license. So the design certification is not regulatory approval, but it's a step towards ultimately submitting application that you're asking your customers to do to get that license. For us, we don't do any of that. We just go straight to the combined license approach. This is largely because of what we're doing on a business model side. We're owning these plans. We're not just trying to sell the designs or license off the design. So that means you go straight into licensing and allows us to build an operator plan, which then sets the stage for us to then pursue this one step licensing process and have the benefits of repeatability that this framework allows. One really important thing that's been developed in the past when they were developing these regulatory frameworks was the ability to subsequently license additional plans in an expedited and more efficient manner. What that means is that after you've licensed your first plan, you get a combined license for that first plan that becomes your reference license. Then every license you submit thereafter becomes a subsequent license. In other terms, your reference license becomes your reference combined license and then your subsequent license because you're subsequently combined licenses. That benefits us because the subsequent reviews on the subsequent license applications are only focusing on the things that have changed from the reference application that has significant benefits in terms of accelerating and reducing review timelines, while also allowing us to scale rapidly and to follow on plans. So on the design side, our product roadmap includes three reactor sizes to meet customer needs based on what we're seeing in the customer market. And that spans megawatt to gigawatt scale deployments. What's great about this is it also positions us to have the benefits of spanning across a bunch of different markets according to these size offerings. We've long known that there's not a one size fits all design in this space. Instead, we wanted to start as small as we could for the aforementioned benefits, but then have a pathway to scale using the same technology. So we are currently offering a 15 megawatt and a 50 megawatt plan, and are also developing a 100 to 200 megawatt plan as well. These are all very similar looking technologies as we scale up, but just slightly bigger from a physical footprint. We are targeting 15 and 50 megawatt ranges to start because based on the feedback we've seen from our customers, that's a really great size range to be in to meet their needs. The numbers are very large around the opportunities to service some of these customers in these markets, especially with what our business model is, which is designing and owning and operating these plants and selling power to the direct customers. So when we talk about providing power directly to energy users, these sizes offer a good entry point to a number of different markets, and these projects can be quite large when they aggregate together. The reality too is that data centers are making up a vast majority of the market opportunity we see in front of us. While the numbers are very large around those opportunities, especially around the larger scale AI purpose data centers, these projects are not being deployed all at once at a one gigawatt or multi-gigawatt scale. Instead, they're ramping into it. It's phased growth through a development process. When you're talking about these facilities as they grow up, they also need to have the ability to have power that meets their needs, which in other words is something that is always on and with a high availability and high reliability. That means they need to have something that offers them that kind of NPlus of one generation footprint so that they are more or less confident to get the energy when they need it and how they need it. In other words, you're going to build more power capacity as you ramp up with your customers, which is a really exciting thing for us, given our size, we're uniquely positioned to do it, but it also allows us to grow with them as they build out their overall footprint and they meet their customer needs and therefore need more energy as that goes forward. The important thing about this too, just to emphasize this one more time, is that we can build up to match where our customers are going as they grow their order book and their demand in a phased way, while also building an extra reactor that is providing power on standby for them when they need it because at the end of the day, we have to take some of our plants offline every once in a while to service them or refuel them. That means we can deliver that full freight power solution for our customers and do so in a way that's economically attractive because we're not too large to do so. So our size is really in that sweet spot that matches very well with both the growth and the NPlus 1 requirements that our data center customers have. And to dive a bit deeper on the data center side, one of the things that stood out to us in our engagement with potential customers is learning about what their energy needs really look like. We're finding that a data center, a data center campus is often made up of a number of data halls, as we like to call them. Those data halls are whatever built out kind of in building block fashion to fill out an ultimate facility or a campus. We're finding that most of the data halls today that are being planned are planned to consume between 35 and maybe 50 megawatts each. So each company has a different architectures and different approaches, but we're seeing that there's a significant amount of upside and opportunity around where those data halls are. We also see some development that's on the smaller size, power chunks between 10 and 20 megawatts. So at the end of the day, that gives us a really good position in the market to service in different range of power levels. So in summary, when we think about our sites and our project opportunities, we're matching very well with how we see data center markets and other industrial markets developing. As we look at the market today, based on the conversations we have with our partners and customers, we see that the ranges of power needed on a site-by-site or project-by-project, or even sort of data centered phase development project basis. They're typically looking at needing power between 10 and 20 or between 30 and 50 megawatt chunks while also needing that high reliability of power. Our ability to scale with them means we're really well positioned to build up. This position is quite differently than if you were to go in and say, let's build one plant to provide all the power for a facility. That's been hard to offer an NPlus 1 dynamic because you would significantly have to overbuild your capacity. So in this illustration, if you had a 500 megawatt project, to build two 500 megawatt projects to provide NPlus 1, that would be a lot of stranded capacity. Whereas for 500 megawatt projects, we could build 10, 15 megawatt plants within an additional 50 megawatt plant. So 11 total to offer that NPlus 1 reliability while also offering the same amount of power. Additionally, as customers build out, they're probably going to need 500 megawatts all at once. They're going to need it over time. And that time might be a ramp up of two or five or more years. So they might start by needing 50 and then 100 and then 250 and then 500 megawatts in total as they scale forward. Well, that's great because we can build up and match that with them. That also gives us the benefits of ordering parts for the reactor and components for the reactor in volume, just to meet one project, very different dynamic than building one plant to purposely fill that. And if you built that 500 megawatt plant to fill that demand, you'd have a lot of stranded capacity while your customer would ramp up. That challenges some of the economics accordingly. So our model really works well to match where we see data center development moving, as well as other industrial users and other power users. So with that, I'll go ahead and hand off to our CFO, Craig, who's going to take it over and talk to you about our business model. Craig.

Thanks, Jake. As we highlighted at our Investor Day presentation back in February of this year, slide 15 shows how we have developed and are implementing a business model with five key attributes that can be seen on the right-hand portion of this slide, namely, recurring cashflow from power purchase agreements. We expect these contracts to be at least 20 years in duration, which supports our build, own and operate business model. Second, capital efficient approach to asset deployment enabled by the size and technology foundational pillars Jake discussed earlier. Over time, this should allow us to reduce cost and asset construction time through purchasing economies of scale, as well as efficiencies that should come from deploying essentially the same asset over time. Third, these two factors should generate attractive asset returns on their own. In addition, we look to deliver upsides to those returns by accessing investment tax credits or ITCs and utilizing project financing against the long duration PPAs. Fourth, longer term, we are working to deploy fuel recycling technology, which should have the dual benefit of providing enhanced security to our fuel supply chain and potentially reduce our fuel cost by over 80% versus the cost of fresh fuel. And finally, a strong balance sheet to enable growth. Post the completion of our merger with AltC, we believe that we are now well capitalized to execute our business plans, which should be a significant competitive advantage. Point 16 reflects that we expect this approach to asset and capital efficiency to create a strong position for our business in terms of our overall delivered levelized cost of energy or LCOE. Initially, we expect our first of a kind or FOAC LCOE to be approximately $90 per megawatt hour. This figure should improve as investment tax credits, scale economies and improved project execution capabilities are utilized across our business. The overall ability to produce power 24 hours per day and at a high capacity factor should make our overall LCOE very competitive versus other clean energy alternatives. Finally, I would note that this chart does not reflect the potential upsides that can be achieved to the deployment of fuel recycling technology. Moving on, one question we've been asked is how we plan to capitalize the business going forward? One of the benefits of the extremely low level of redemptions from our merger with AltC is that not only does it put us in a great position to execute our business plan, but it also means we can be strategic as we develop and implement a go-forward financing strategy. Moving left to right on chart 17, you can see that over time, we expect to utilize Oklo's equity in the form of cash on the balance sheet to finance anywhere from 25% to 35% of our projects with the remaining 65% to 75% being financed potentially through a mix of budget financing, tax equity structures and the DOE's loan program office. We are currently assessing each of these options across a number of lenses and we'll provide further updates as our plans mature. As we have discussed at numerous investor and analyst meetings, we believe it is clear that there is significant untapped demand for the clean, affordable and reliable power that nuclear in general can deliver and that is ideally suited for Oklo's build, own and operate business model. On slide 18, we see four macro trends that are providing tailwinds to our industry, which include increasing electricity demand, decreasing electricity capacity, grid reliability challenges and decarbonization targets. Moving to the next slide, the impact of this growth at the macro level is providing increased demand for Oklo's clean, reliable, affordable offer as reflected on slide 18. As we've previously discussed, we are targeting customers across the six market sectors reflected on this slide. In the 12 months, we have made announcements across each of these sectors with the exception of master plan communities but we do have commercial discussions underway with customers in this sector as well. Overall, we believe the strong level of customer interest and traction demonstrates the applicability for our Aurora powerhouses across a variety of use cases and should create a very strong pipeline of business to underpin sizable revenue growth. As reflected on the left bar on slide 19, at the time of our announcement of our merger with AltC, we noted that we had over 700 megawatts of business that had been signed to a combination of memorandum of understanding and letters of intent. Since that time, we've made new announcements in the data center market sector with Equinix and Wyoming Hyperscale as well as an announcement with Diamondback Energy in the oil and gas sector. These more recent announcements have also served to demonstrate our customer-oriented approach whereby we look to deploy 50 megawatt powerhouses to meet the needs of those customers. I would also like to point out that this customer momentum is continuing. Maintenance was not only Oklo's first day of trading on the New York Stock Exchange but also a day where we saw sizable inbound inquiries from customers looking about power from Oklo. As such, we expect to make more customer announcements during the remainder of 2024. I would now like to turn back over to Jake.

Thank you, Craig. As we talked about a bit before, we have some significant advantages with respect to our timing in the market as well as our product offering. After closing the business combination with AltC, we raised a significant amount of capital through that process, leading to a well-capitalized balance sheet to now execute against our plans. We are uniquely positioned in the advanced nuclear industry with respect to being the only company that has a site use permit to build our first plant at our national laboratory, a site use permit from the Department of Energy and having fuel that was competitively awarded to us from Idaho National Laboratory, both received in 2019. That's on top of the significant regulatory traction we have to date. Additionally, the differentiation with respect to our business model, our size and our technology make us well-positioned to capitalize on the significant amount of opportunity in the market space building up today. Over the course of the next few years, we have a couple of exciting milestones to look out through. And as we think about the growth of the company, we're excited about the transition from turning our first plant on into growth and scale from there. Between now and 2027, we'll be working to deploy our first plant in Idaho National Laboratory. This is a fully commercial plant, and it's a plant that we have a site use permit for, we have fuel for, and we have significant regulatory traction around. In parallel to this, we'll also be developing plants in other areas and other sites to meet our growing customer needs and looking forward to ramping up our growth after 2027. Over the course of the first and second quarters of this year, we hit several major milestones. We closed the business combination and started trading on the New York Stock Exchange. We achieved a significant regulatory milestone with the Department of Energy with respect to our first fuel fabrication facility. We continued to advance our project in Southern Ohio and entered into land agreements to deploy two plants there. We signed an LOI to supply 50 megawatts of power to Diamondback Energy in the Permian Basin in Texas. We signed an MOU with Atomic Alchemy, a radioisotope production company, to collaborate on isotope production, particularly with the use of our fast neutrons, as well as the radioisotopes that are coproducts from our recycling facilities. We partnered with Wyoming Hyperscale to deliver 100 megawatts through its data centers. We achieved significant milestones with Argonne National Laboratory, one of the leading experts in sodium and liquid metal fast reactor technology, involving the use of their state-of-the-art thermo-hydraulic testing facilities. We also established what we announced earlier today, our preferred supplier agreement for steam turbine generator products and services with Siemens Energy. We're very excited about this partnership because it is validation of our business model and our approach, that we can leverage suppliers that make components for other purposes that we can directly use in our system. What we're buying from Siemens looks very similar to what they make for fossil-fired plants, and we're very excited about our partnership with them going forward. We also continue to make progress to put in place numerous supplier contracts that would be critical to the deployment of our first Aurora plant at Idaho National Laboratories, and for our supply chain that will be required to deploy a fleet of powerhouses. Contracting is underway for site preparation and field fabrication at INL, which we expect to ramp up during the remainder of 2024 and beyond. In most cases, we're at the commercial negotiation stage with key vendors, and hence are limited to the details we can provide at this time. In addition, we recently announced that we have finalized our preferred supplier agreement with Siemens Energy, who will be providing steam turbine and generator technologies, as well as services for our fleet of powerhouses. We believe having an agreement with such a recognized name as Siemens Energy is unique for our industry and a testament to the type of partnership arrangement that our business model unlocks, not only for Oklo, but for our key suppliers. Additionally, one of the exciting parts of this business is what we can do on the recycling front. Fast reactors have the unique ability to recycle used fuel, and we've been actively pursuing this to diversify our fuel supplies and capitalize on the benefits of fuel recycling. This approach not only improves fuel economics, but also opens up additional revenue streams from the sale of co-products generated during the recycling process. This is the technology that has been demonstrated before, and that is, in fact, already operating at a small scale at national laboratories. Our work with Argonne and our Department of Energy partners has been focused on furthering the development of this technology to prepare for industrialization and scaling up operations. We hit several milestones in the last quarter, notably demonstrating a successful end-to-end recycling process with Argonne National Laboratory. We also continue to advance our regulatory engagement with the NRC, and are submitting white papers and holding pre-application meetings in several key topic areas. Finally, I mentioned this before, but we were also excited to advance and announce our strategic partnership with Atomic Alchemy, a company working on producing radioisotopes. Our partnership entails work on using the fast neutrons we produce for radioisotope production, as well as partnering with them to process co-products from the recycling facility that can be packaged and sold into various industrial, medical, and other markets. So going forward, we look forward to keeping the market up to-date on our progress in six major areas, reactor licensing progress, customer pipeline development, project execution, the development of fuel recycling, strategic partnerships, as well as financial updates. So with that, I'll hand it over to our CFO, Craig, again. Craig.

Thanks, Jake. Both Oklo and AltC are very pleased with the outcome of our merger, which closed on May 9th, 2024. Slide 27 demonstrates several of the key outcomes of this transaction, whereby a record 0.002% of redemptions translated into gross proceeds of over $300 million. After associated fees, over $276 million in cash moved on to Oklo's balance sheet that is being used to fund our business. We believe that attractive pre-money valuation of $875 million, which also included the Equinix prepayment for power, as well as the straightforward nature of the deal that resulted in one class of common stock with no words or pipe, were also critical drivers of this successful outcome. As part of our public offering, as seen on slide 28, Oklo established a new world-class board of directors with individuals with backgrounds in defense, oil and gas, power generation, capital markets, and artificial intelligence. This deep expertise will benefit Oklo as the company executes on its business plan to deliver its vision. Oklo is also lucky to have an experienced management team with a broad spectrum of backgrounds from large Fortune 500 companies, as well as relevant government agencies, including the U.S. Department of Energy and nuclear-focused research institutions, such as the Idaho National Laboratory. Moving to slide number 30, we know that there have been some questions post the close of our transaction regarding shareholder lockups. Post-deal completion, our total outstanding share account is slightly over 122 million shares. Of those outstanding shares, our co-founders, as well as our chairman and the AltC sponsor are under multi-year lockups that include an early release mechanism for share price appreciation, with trigger set at $12, $14, and $16 per share. These lockups represent approximately 34% of total shares outstanding. In addition, we have a few early stage investors who are subject to 180-day lockup from the transaction date, but equate to roughly 11% of shares outstanding. All other original investors did not have lockups, which were therefore freely tradable on May 10th, which resulted in no sizable overhang on the stock. Moving on to our financial highlights. Year-to-date, Oklo's cash use and operation sits at $17 million, made up of a net loss of $53.3 million, offset by $38.9 million in non-cash impact, the main drivers of which I will highlight momentarily. At the end of second quarter, cash and marketable securities were $294.6 million, primarily driven by the $276 million in proceeds, net of fees received at deal closure. Year-to-date, our operating loss of $25.1 million included $9.2 million of non-cash, stock-based compensation expenses, which was primarily driven by a one-time fair market value adjustment of $7.8 million related to earn-out shares, that would be payable to Oklo's staff who have vested options at the time of deal closure. Full year of 2024, our operating loss expectations are still in line with our prior guidance of $40 million to $50 million, that was noted in our super 8-K filing. Our year-to-date net loss of $53.3 million, including non-cash fair market losses of $30 million associated with a safe note revaluation and $7.8 million losses in stock-based compensation. Both of these non-cash adjustments will require these back closing entries. Further details on our second quarter and year-to-date results can be found at the end of these materials and in our 10-Q that will be posted to the investor section of Oklo's website. With the filing of our 10-Q for second quarter, we're looking forward to several upcoming investor events, including Canaccord Genuity's annual growth conference and Citi's one-on-one midstream and new energy infrastructure conference, both of which will occur later this week. In addition, we are scheduling an Ask Me Anything session with our executive team for later in the month of August. But finally, to close and to emphasize the points made during this conversation. We believe there are six factors that make Oklo such a compelling investment proposition. First, technology and size that is based on a proven fast reactor approach that we look to deploy at scale to reduce complexity, cost, and time to delivery. Second, an attractive business model that is customer oriented and enables recurring revenue and profits. Third, superior economics that look to deliver power and very competitive levelized cost of energy. Fourth, a diverse and growing customer base with interest across six market sectors. Fifth, a streamlined approach to regulatory approval underpinned by our combined license application process that leverages years of experience in our work with the NRC. And finally, a well-capitalized balance sheet that positions us well for the implementation of our business strategy. With that, I would like to thank you for your time and Jake and I will now open the call for questions.

Thank you. [Operator Instructions]. And we'll go first to Vikram Bagri with Citi. Your line is open. Please go ahead.

Hi, good afternoon, everyone. Very thorough update from the letter presentation, release and prepared comments, appreciate the color. To start off, very impressive increase in pipeline from 700 megawatts to 1.35 gigawatts now. The letter cites the AltC merger as one of the drivers of the increase. I was wondering what led to this meaningful increase in the pipeline? Is it due to more visibility from the merger? Is it driven by data center AI power needs or more liquidity now that you have to actively engage the customers and our progress on regulatory front? If you can identify what's sort of like driving this level of interest and what sectors are majorly contributing to this demand?

Sure, Vik, it's Craig. I can take that. So, the growth from 700 megawatts to the 1.3, 1.4 gigawatts was really the result of the things that we announced between deal announcement and deal closure. So that would be the Equinix transaction, Wyoming Hyperscale, Diamondback Energy. But what we did see on May 10th is Jake's phone started to ring off the hook and Brian Gitt's phone started to ring off the hook with even more customers expressing interest. But I think there probably was an element of some of those customers wanting to see if the deal would close and at what level the deal would close. And once it did, I think that gave them confidence to progress business development conversation. So I would actually think that as those conversations progressed and when we do an update in the third quarter, that 1.3 to 1.4 gigawatt, we could be in a world where that figure could be higher and we'll continue to work on those announcements or those deals with customers. And we hope to have more to announce in the coming month.

Thanks, Craig. And then on the relative note, the slides mentioned that you're looking at converting a lot of these letter of intents into PPAs later this year, next year. I was wondering if you can talk about how many of these cases are you doing site evaluations? How are you thinking about doing site evaluations? And then how are you incorporating fuel costs in your PPAs when you convert these LOIs into PPAs? Will fuel costs be passed through? And then finally, we've seen significant increase in capacity prices in recent auctions. If you can also talk about the PPA rates that you're seeing in the market, it seems like those should be higher, much uniquely higher than what you had indicated at the time of the merger?

Yes, thank you, and this is Jake. It's a good set of questions and a good thoughtful set of questions. I think from a matriculation perspective, what we're excited about seeing is kind of a pool of LOIs that then set the stage for us to start working with each of those customers, as well as others in the pipeline that are coming forward to then identify basically site-specific considerations that move into the PPA negotiation process. So right now, we are actively looking at site exploration around several of the partners we've announced about not just where to go, but where on their specific sites of land that they already have make the most sense to deploy. So we're going through a characterization process there. We have a methodology we've developed and we've been working on, basically executing against with our partners to identify what makes the most sense for their needs and for our needs. So those things all then play into then the specific PPA terms and pricing development. In the LOIs, we try to set those forward, at least at that stage, to make sure we're all working in the same direction. But then that will help sort of fine-tune what's to be expected based on the specifics that evolve during the actual PPA negotiation process. PPA negotiations take a long time, so we're excited to be in those discussions with several groups and we're excited about more kind of continuing to migrate into that space. That said, in terms of the question around fuel costs, I think what we're seeing, and this ties to the other part of your question, which is right now, energy pricing is quite constructive to what we're doing because there's a significant demand uptick, of course, for a lot of reasons. To your earlier question, if you look at the 650 megawatts we brought forward and announced here over the second quarter, 600 of those megawatts were for data centers. So that is -- I think, a somewhat reasonable approximation for the breakdown in customer input or engagement that we're seeing by sector. But accordingly, we're seeing, obviously, demand, limited supply for power. That's constructive to us, of course. It allows us to monetize those benefits and have some leverage in that case, which is great. But since fuel is a scarce item for everybody in the nuclear side, scarce is the wrong word. Since fuel is a pricing, I would say, a volatile pricing input for everything in the nuclear side right now, especially for new advanced plants, we found that there's an openness to fuel cost pass-throughs. And we have a unique advantage in the fact that, as we pursue recycling, it also opens the door for our customers to be quite open to having the discussion of fuel cost pass-through if they can also then get the benefit of the fuel cost savings if recycling comes online, when and if recycling comes online. So that creates a pretty, I think, favorable dynamic for us so that we can not get hung up early on necessarily with some fuel pricing volatility, but have a pathway to get to market. And then that helps us drive the case for deploying your recycling even sooner, which then helps us deploy more reactors and lower costs altogether.

Thanks, Jake. I have a couple more, and then I can jump back into the queue. I was wondering if I could again share, Jake, how many pre-filing discussions you've had so far, and the letter indicates the first plant will be by 2027 versus the previous expectations in 2026 or 2027. I was wondering if I'm reading too much into the language or there is slight delay in the timeline, and if you can just share how those conversations are going and how many hours of conversations you've had so far?

Yes, and lots of conversation with the NRC. I think the latest tally in our slides is, we've had -- we've submitted about 55 draft and technical reports to the NRC dating back through our engagement starting since 2016. We've had over 500 technical and planning meetings. It's a lot of engagement. We continue at a pretty regular pace. I would say, we're meeting on average for a few hours once every couple of weeks right now as we ramp into the pre-application readiness assessment to then go forward. That's helping us and the NRC make sure we define the scope of what we expect out of the readiness assessment appropriately and move forward from there. One really significant feature that puts a lot more work on companies, but again, I think it's a significant feature, is the flexibility that the NRC has in terms of how you can ultimately get a commercial license from pre-application all the way through licensing. So there's a huge menu of items you can choose from. And what's nice then is each company can kind of pursue the path that makes the most sense for them. And for us, that works very favorably because of our business model we're going straight to build and operate. We go straight to the license to actually build and operate the plant. As opposed to taking steps to get a design certification and then have to go through the process we're going through or take the steps to get a construction permit and then get an operating license. Instead, we do it all at once, which has some significant efficiencies for us. So then similarly on the pre-application side, as we ramp into preparing for submitting the application, you can do all sorts of things in that pre-application practice to make sure you're moving forward, you're sort of retiring the risk as the company engaging as the pre-applicant accordingly, and getting the right feedback with the NRC and helping the NRC accordingly prepare for review. So it's highly iterative, it's highly dynamic. We're engaging with them on the reactor front as well as now on the fuel recycling front and the larger scale fuel fabrication front. So a lot of activity there, but at the end of the day, we're working to basically be in a position to submit an application as soon as we reasonably think we can get to, which is in next year, sort of looking at having that application go in next year, followed by subsequent applications to come in the latter part of next year, depending on the timelines of how those PPAs and other things develop to then have several and staggered review. And that's a big feature for our model as well is the benefits that come from having multiple, kind of in a staggered parallel review path. In terms of the timeline, I would say, when we announced the deal, we were looking at 2026, 2027, kind of that was built somewhat under the context of us closing the deal and with the possibility that we could close the deal in 2023 because that ended up happening closer to the midpoint of 2024. I think that's where it kind of delayed some of the deployment of the full capital to then start executing fully against that. So it kind of fully shifted us towards the 2027 date. Additionally, there are some other factors that are on hand with respect to how we're working through on the supply chain, the site development, and all those other pieces. But so far, those have largely been moving forward reasonably well. It's nice for our first plant that we have fuel awarded and allocated to us. We're not subject to some of the supply limitations for that first plant. Of course, we will be for our subsequent plant, so that's why we've partnered with Centrus and others to actively work through that. But it's nice to take some of that risk for your first plant off the table, which is a big deal for us. So that's kind of why the timeline is pretty firm up on the '27 date and '26 is really just, isn't really achievable from the perspective of when the deal closed in '24 versus when there was a possibility of it closing in '23.

[Operator Instructions]. We'll move next to Thomas Meric with Janney Montgomery.

Good afternoon. Congratulations on all the success there. Just wanted to start out on EBR-II. The question's really around capacity factor of sodium cooled fast reactors. And what does the data suggest as you've reviewed it that a sodium cooled fast reactor can hit on a real world capacity factor basis. And I'm asking just kind of with the perspective of we have a long deep history of operating large light water reactors at 90% and 92% capacity factor. And it took us a while to get there. And how should I think about the time it'll take for your Gen 4 reactor to get to capacity factors in the 90s?

Yes, that's a great question. And actually a real fun little nugget of information. That's not the easiest thing to pull out. We developed all these amazing things in the nuclear industry that came out starting, back in the 50s and 60s, of course on paper. So, all of the great records of history and operations and all these things were largely paper-based for EBR-II and for prior fast reactors as well as the Fast Flex Test Facility, FFTF. But the FFTF and EBR-II are the plants we kind of most directly derive technical legacy and learning from is kind of the latest iterations, if you will, from prior development in the US. The reason I point out that they were on paper is it makes accessing that less scalable. Historically speaking, there's been a big effort to digitize all those records, which has been great. We've been pushing forward on that. We've been working and very thankful for the work that the National Labs and the Department of Energy has done to do that, because that stuff is a treasure trove of information and data. But one of the great things that kind of stood out to this and one of the things that when I learned it, back around the formation of the company was kind of mind blowing in a positive sense was EBR-II and FFTF, both liquids that include fast reactors, actually achieve superior operating capacity factors and operating characteristics than commercial light water plants at the time we're achieving. And to me, the thing that's great, and there's reasons why, but what was even more incredible about that to me was that both of those reactors, their job was not to produce power. Their job was actually to test materials and fuel. So they're moving stuff in and out of the reactor at a high cadence, at a high frequency. It means you're shutting it down, turning it back on, shutting it intentionally, doing all of that. And they still beat what was going on the light water side. And they were contributing factors. You can pull out more information from occupational dose rates, other things like that, that can affect and dictate sort of operational timing and maintenance timing and how you work around the plan and what you can service in the plan while operating and without having to take the plan offline. All of those things were actually, generally speaking, lower than what you were seeing commensurately at commercial light water plants. And a lot of the key inherent kind of design and I would say benefits of sodium fast reactor technology, the fact that it showed you can do those things was a huge validation point that you could achieve commensurate, if not superior operating capacity factors. At the end of the day, I think we can slightly beat -- we can get up into the mid 90s, I think is a trajectory we can get to potentially as we build out and get a lot of experience. It's going to take some time to get there though, because like you pointed out, we have tons of operational experience with light water reactors. And a lot of that is directly applicable to us, but not all of it is. But thankfully there's experience with what we're doing in the past that was quite successful that we can draw from accordingly and then benefit from that. So the fact that we're already starting at a better place than sort of light water plants were 40, 50 years ago, gives me a lot of confidence that we have a pretty good trajectory to actually outperform those technologies, at least match those technologies, outperform those technologies. And as we work with potential customers, we generally build in some flexibility in how we want to scope what our early plants are going to be operating at from a capacity factor perspective, just so we can obviously get through those sort of initial learning curves to get these things going into the higher end ranges of capacity factor that we can achieve. But it is the only technology that in a meaningful way actually outperform light water plants. Everything else has actually been pretty significantly worse than light water. It's because light water is a great technology. It just happens to have some features that make it fairly operable or operator friendly, I should say.

Super helpful, thank you. And then on the demand side, just curious your thoughts around defense applications, just thinking of defense innovation solicitation from earlier this summer. Thoughts around that, and just micro reactors at defense, generally speaking. And then just kind of seeking the last one in here and kind of an administrative question, but how do I think about programs with the DOD and NRC licensing? And is there like a crosswalk there that makes one more easier than the other? Just generally, how do I think about those licensing Programs, and that's it for me, thanks.

Yes, yes, of course, great questions. On the, sort of on the defense engagement, we've been actively working, obviously, with the different departments or the different branches in the Department of Defense for some time. A year ago, we were awarded the first round or awarded initially for the Eielson project up in Alaska. As that had been a threat of a protest, the kind of conservative, cautious procurement actions that is very common today in terms of the protest cycles at the Defense Department, that was then pulled back to then update the review. It was then re-awarded to us in February. Then there was a protest file that was pulled in March. It's going through the next updates there. Given the cadence before was about six months, we expect, hopefully, that we'll be entering into kind of an update on that front as well. The fact that we were awarded it twice gives us some confidence, but of course, we'll see kind of where that moves. The thing is, is we're offering something based on that call. And then if you look at the Defense Innovation Unit kind of call, it's pretty well aligned with what they're looking for in terms of business model. And we have some flexibility to get down into the size ranges they want to be looking at. We're not going to be serving the one megawatt in kind of small scale. We see a lot more opportunity, obviously, at the higher ends of those ranges, but we can definitely perform and deliver a very competitive and attractive solution. So, we're good to see how those projects and those things develop. At the end of the day, the energy needs that we've learned from the Defense Department and what they project forward is quite diverse in offerings. So there's going to be, I think, multiple solutions that can offer -- well, multiple companies that can offer different solutions that are successful for them. And we see ourselves being positioned potentially to be one of those, especially given our sort of prior success there. One of the things that was part of the Air Force call was they wanted it to be licensed with the Nuclear Regulatory Commission. But generally speaking, and there's a lot of new ones here, but generally speaking, the Defense Department can actually authorize their own nuclear plants. So that is a pathway some are looking at pursuing some of the branches and some deployment cases are looking at as well as the potentiality. The thing we like about that is it provides sort of a -- in our perspective, a backup option to the NRC, but it also provides a good sort of motivation that, hey, look, this is something that can be done, but their preference is that the NRC does it. And their preference isn't based on just wishing and hopeful thinking. The Air Force has been around some of these NRC meetings dating back to 2018, maybe even earlier, but they've been engaging there to know that this is something that they have confidence that can be done, right? I can't speak fully for them, but from what we've seen, what they've identified is what's important about what they're offering. The empowering these bases is mission critical for them. So they aren't going to be sort of jeopardizing that with some hopeful thinking about what a regulator can do instead. I think they've made those decisions intentionally based on what they expect to be able to be done. That said, they also have optionality, which gives them great positioning. And we see that as generally speaking, a broad benefit for everybody, us included as well as others. So that's kind of how we see that playing out. The nice thing for us in general, it's sometimes very nice to work with government-owned land because it's well understood. It can also be challenged, obviously, that comes with the fact that it might have other things around and on it. But at the end of the day, there are some benefits there. So our model of being able to site where a customer wants us, including on their lands, works pretty favorably for us and for the off-takers.

Jake, it's also one of the reasons why we were really glad to get somebody like retired General Jansen on our board to get insights around that market sector. I would also note that, I think this call was scheduled to end at 6 p.m. [ph] Eastern Standard Time, but Jake and I are more than happy to stay on and continue answering questions.

We'll move next to Ryan Pfingst with the B. Riley.

Hey guys, thanks for taking my questions. Just curious, are you seeing a difference in demand between the 15 and 50 megawatt plants? Maybe if we're looking at the pipeline, how would that break down between the two?

Yes, so it's a great question, Ryan. So I think if you actually look at the things that were announced when I started with the company back in August of last year, so. The projects in Ohio, the project in Idaho, the project at Allison, those were all in the 15 megawatt size range. But most of the things that we've announced subsequent to that, that's really caused that growth in the order book is more in the 50, 5-0 megawatt size range. Jake and I were also in a meeting a couple of weeks ago at our headquarters with a potential data center customer. One of the things that was great about that conversation is getting into the details of how are they thinking about deploying data centers at a Greenfield site and how might we match up a deployment schedule of 50 megawatt powerhouses to support that. So I think it's just also an example of, you know, we're trying to be customer oriented and customer responsive, you know, and I think now our order book kind of reflects that with probably more things in the 50 megawatt size than the 15.

Yes, I appreciate that color, Craig. Any update on how you're thinking about the estimated construction and fuel costs for your plants? I know we've spoken about 70 million-ish dollars being a good target for the 15 megawatt version, but wondering if you have an update there.

So if you look at our investor day materials, I don't have it right in front of me, but the 50 megawatt size is, I think our first of a kind was about $145 million. It decreases when we apply some of those economies of scale, fuel costs have gone up. In fact, at times, I think we would see, you know, an increase on that number, but also as we were speaking earlier, just the overall demand and power and the pricing around PPAs is also going up to help offset. The other thing that does help us a bit is in all of those financials that we showed back in the investor day, we were not assuming any benefit from ITCs, but the ITC actually goes against both the asset cost and the fuel cost. So there is a little bit of an element of the ITC bid in that 30% to 40% range that can act as a hedge against those inflationary pressures.

We'll go to our next question from Jeffrey Campbell with Seaport Research Partners.

Good evening and thank you for all the color. As you think about possible title 17 loan applications, is this effort aimed more toward installations after the initial national laboratory installation? And if so, are you thinking more about a project-by-project type of financing or perhaps multiple projects in one application?

I think, Jeff, at this point, we're probably looking at both of those scenarios and there's probably a middle ground that if we do have a project that is made up of more than one powerhouse, you could actually bundle that up as well as we look at exploring financing strategies. The other thing I tried to call out in the slide that looked at that mix of for each project, how much is coming from cash off the balance sheet versus financing structures? One of the things that Graham Johnson, who's our Treasurer and I are starting to look at is overall what would be the right mix around tax financing structures, things like the loan program office, as well as project financing structures, just so we can get both the right mix of cost of capital, but not all financing structures are created equal in terms of the effort it's going to take to put one of those in place.

Okay, thank you. As you look ahead to a time when you have multiple installation projects operating simultaneously, do you imagine that the work will accrue to a handful of EPCs who will have aligned to your work or is it going to be more of a separate EPC aligned to each separate project?

Yes, it's a thoughtful question and it's more the former. Our view strongly has been to create and maintain a competitive environment amongst the EPCs and work with a number of different ones based on sort of regional and maybe site-specific experience, characteristics, or preferences, but that way we have diversity in our sort of EPC bench while also having flexibility and also having, I would say, competitiveness from a cost perspective. And that's, I think, quite constructive for what we're trying to do. That said, some of this does get specialized as we look at certain specific deployment scenarios or, for example, certain defense projects. There's likely a narrower set of EPCs we'd end up wanting to work with just given what would probably be preferred for prior experience. But generally speaking, on average we expect to have kind of a relatively deep bench of folks that we can work with accordingly to get these things built out and scaled out accordingly.

We'll take our next question from Graham Price with Raymond James.

Hi, good afternoon. Thanks for taking my question and for fitting me in. Just one on my end. Just wondering if we could get an update on the project with Diamondback Energy, specifically what's a realistic timetable for deployment there?

Yes. So basically, we announced the partnership with them, largely stemmed from engagement we started having with them towards the end of 2023. So we're going through the process of identifying the specific sites they want us to be on. I'm sorry, the specific site of the number of sites they're looking at they want us to be on. From our perspective, we view this as a kind of an initial project. I think given what we see as sort of the demand projections for electrification in the Permian, this is just like a toe in the water, so to speak. So an exciting one, but wanting to obviously make sure it's impactful and also something that positions things for more successful scalability. So as we go through that effort, I think we're targeting, developing out the specific site, developing out the PPA with all those factors in mind to towards potentiality for future expansion possibly. So it takes a good amount of work to go through those efforts. There's also a lot of grid constraints down there and just broadly speaking in the Permian, but not everywhere. So obviously mindful of that kind of changes how we think about the site selection processes and down selection processes. And then, I think depending on timelines, we'd expect something in the 2028 to 2029 window for initial power generation at this point. But some of that's going to be largely dependent on sort of where and how Diamondback is going to want to proceed with the times -- with those specific locations selection process. But that's kind of how we're marching forward on our end.

Got it. I guess just broadly, how does the opportunities look for the oil and gas space in the Permian and other basins as well?

It's pretty -- it's very exciting. It's very large. I think as we see what we've been learning about, or I should say we -- myself personally, have been learning about the opportunities around electrification and the benefits that it gives to operate in the region. It's pretty promising. I think we see a pretty large order book potential down there and our model is well positioned to kind of provide into that. The numbers are going to be -- it depends on a number of factors, but we've seen people talk externally on like high hundreds of megawatts to a couple gigawatts of power would be needed for electrification. And so I think as you kind of think about how to ballpark size it, I think that's a reasonable starting point. That said, part of our view and part of the sort of strategic developments we've taken here, last year we had we've taken here -- last year we raised capital before the transaction course. So last year from Liberty Energy Services and through that process got to know, Chris Wright had joined our board here after we closed the transaction and given his position and expertise in the field, part of his conviction about this was obviously he loves the story around nuclear and energy abundance, but also some of the potentiality for the market development side on the oil and gas piece and things. So I see quite a bit of upside on there. I just was the one that rambled while our CFO actually spent a good amount of time in the oil and gas industry. So Craig, do you want to add anything on that?

I would just say, 30 years in the oil and gas sector and most of the operations need to operate 24/7. They want reliability. And most of the majors have got some form of carbon reduction targets that they're trying to meet too. So I think our offer works very well to meet those needs.

We'll move to our next question from [indiscernible]. Your line is open. Please go ahead.

Thank you. Congratulations on the progress and the first public call. And thanks for taking my questions. On slide 20 with your pipeline, can you give us some like outline of the steps from signing the initial letter to going through the process to getting a final power reactor?

Yes. So basically, the way this works for us, kind of from a process perspective, as we start engaging with customers is to sort of progress it through that relationship because each site, each consideration around the market, each customer, when I say the market, I mean the local market consideration, each customer, everything is variable. So we go through a process of sort of marching through progression as we engage with customers and they're interested to move forward, often starting with either a memorandum of understanding, which can kind of set a broad scope to survey things and figure out where we want to go. And then that often kind of goes into a letter of intent to effectively purchase power from us that outline site and size and price ranges. Sometimes customers know enough, so they kind of leapfrog the MOU and they go straight to the LOI. Actually, that's been more often the case for us. And then from there, we go through a process of working with them to determine the site, determine where we want to, like where it makes the most sense to go. Oftentimes these projects or these kind of -- these LOIs would entail multiple plans being built. So you want to be mindful about how the growth plan works there too as we go through site selection sort of process. And then once those things are identified and determined, you know, you're going through that, you're doing the PPA development and then detailed negotiation accordingly in parallel and then in subsequent to develop finalizing on site, at which point then once you have a PPA signed, we kind of transition into execution. But right now it's in our advantage not to just rush into PPAs given there's so much demand out there and they're going to constrain our opportunities or our ability to -- as you look at what the demand curves are and the indications out there. And we look more high level at what the projections are, right, for what people are talking about meeting and all of these factors that are very good for us. It does create a situation where we might be oversubscribed in our ability to deliver for a couple of years, just given that there's so much interest. Now there's a lot of interest on the backend for that timing. So we want to work with customers to see what makes the most sense to stage those things. But it's a great place to be because it gives us a good position in terms of how we think about prioritization and execution accordingly.

And Ivan, it's Craig. I know one of the challenges on a day like today is we put a lot of materials out there and there's only an hour to look at them. But I think its page eight of our shareholder letter actually has a nice little visualization of the steps from that MOU stage that Jake mentioned until I actually get in a PPM place.

Okay. But now one of my questions, let's say you have a potential customer that's already running a data center. They have land and they want just to contract with you. Would they be able to streamline the licensing permits -- the approval process? I mean, I would believe that you have tremendous demand and probably the bottleneck is the ability to get regulatory approval all the way down to permits to build and eventually implement. So do you have customers in the pipeline that would fit like that outline that could streamline the process? And also, what is the process of, let's say, taking deposits or financial commitments that also could help finance the, you know, the build out of the reactors?

Yes, I'll just start on the siting and Craig, feel free to chime in. So there are some benefits when they have a site and you know where we want to go for various reasons, often times they have infrastructure in hand and everything else. So it does just have some benefits, but most of those benefits are going to be realized on the actual like construction and installation phase. The permitting process itself at the local level might benefit some, but that's largely wrapped up in the federal side. So you mostly are going to see those benefits kind of on the construction side. That said, it helps drive the process forward and it makes things clear and simpler, which is a good thing when you do have a customer who's like that. And I would say, of several, like of the customers we've announced and been talking quite a bit about on the data center side, it's a mix of some of the site they very specifically know and want power at, others have a variety of sites that they're kind of exploring and trying to prioritize where they're going to see the demand go and then where we can go. So it's co-interative. So it just depends kind of on a case by case basis. But I do think in general, places that have sites and have the area and land for us to be able to go build with them, have a strong advantage when it comes to the overall speed of deployment, if that makes sense.

And I would say, the question on financing, and we've already got one great example of Equinix investing in the company. And every customer is going to look at those sorts of things differently. It made me more than happy to entertain those sorts of conversations with some of our other customer stats.

Thank you. That will conclude the analyst Q&A portion. I will now turn the call back to Sam Doane to address retail questions.

Thanks, Jess. Our first question from our retail investors are AI has been a big buzzword, but where else is the focus for Oklo and what goes beyond powering just that facet of the future?

Yes, I think it's definitely getting a lot of attention in terms of growth, opportunity, energy needs, all those things. I think we see it's quite constructive and driving obviously like data center development growth. But there were a couple of big macro factors in hand even before sort of, I would say, AI came storming out of the scene from an energy perspective. Obviously, given our chairman has a pretty unique insight in the future of AI, we've kind of been excited about what could be in the data center side for some time. But the reality is there's been several dynamics here that are favorable for us. One is, we have the energy transition perspective in hand in process, I would almost call it that way. That is, I think, moving at pace. That was kind of -- I think we're coming up right around now is the two year anniversary of the inflation reduction act, obviously, a big piece of legislation and policy to move forward and try to accelerate the energy transition. That is creating a huge amount of demand for electrification. And that number might take time to fully realize. But if you look at what's on hand for that and for incentivization for that, the numbers are staggeringly large. And that's a huge amount of opportunities just there. Additionally, we also have this other big macro factor occurring, which is -- let me just add some context on energy transition. It's such a generalized electrification and sustainable and actually scalable electrification in a meaningful way. Which means, we need to have a whole portfolio, a whole grid perspective, and nuclear is going to play a really important part of that, which is why, you know, over a year ago, the Department of Energy had a report that projected nuclear capacity would come directly triple or so in terms of meeting energy transitioning. That's a huge opportunity alone there. And you see capacity markets recently reflecting that. The fact that capacity markets pricing in PJN went factor 9X or something like that, a significant increase. That reflects sort of the obviously capacity factor for nuclear capacity value that a nuclear plant affords. And some of the shortfalls that some of the deployment of clean energy technology has had in terms of what it's trained on the grid and then how to make sure pricing reflects all the things. So all-in-all, the energy transition is one of the big pillars here for growth, massive in scale. The other is then, and what I mean massive in scale is, you look at those numbers and it's tens to hundreds of gigawatts in total size for that. Additionally, as we look at this massive re-industrialization occurring in the U.S., the Chips Act is a good example of that as we're trying to drive bringing manufacturing back into the United States. That needs energy. A lot of those facilities need 24x7 reliable energy, frankly, to run, and energy costs can be sizable for the input on that. And so I think you're going to see that increasingly play a role in and as companies are looking at citing manufacturing capacity somewhere in the U.S. If power availability or access or reliability is a challenge, which it increasingly is, they're going to be turning to bring their own power solution, which is a win-win for kind of everybody in many ways. And that's pretty constructive to us as well. So that's a big factor there. And then of course you have the AI side. I think those three also then cast their things in between there's the defense opportunities around resilience, there's opportunities for just replacing retiring assets on the power generation side. So there's a lot of things here that are kind of driving forward on this. So at the end of the day, I think AI is a big piece here, but there's a lot of other demand drivers at this point. But we see AI right now moving faster than everything else.

Thanks, Jake. Our next question is, could you provide an update on the expected completion timeline for your waste recycling facility? And once operational, what percentage of fuel in your powerhouses do you anticipate will come from this recycled source?

Yes, so fuel recycling is one of the things I'm really excited about. I could probably take way too long to answer all sorts of fun things about this. So try to be concise on this. So recycling provides a pretty important way to diversify fuel streams for us, as well as the opportunity to reduce fuel costs in a pretty meaningful way, while also enhancing and diversifying revenue streams for the business from sort of co-product sales. All-in-all, pretty exciting, something that we're then pursuing as quickly as we reasonably can accordingly. I think we aim to have a facility operational at the start of the decade, basically, so getting something built out in the late 2020s to be operational come 2029, 2030, and then starting to ramp operations from there. The way this process works, so like refining specifically, is it's modular or it's batch-wise process, so it's inherently modular. So as a result, we anticipate having sort of like a scale-up and ramp-up of modules in the larger scale facility to deliver as we scale. Our goal will be to move as quickly as we can to take up as much of the recycling capacity as we can, but we still see a need that we'll have fresh fuel input on, largely because of sort of the order book and what we're anticipating, the growth scenarios, like we're just talking about driving sort of the demand for our ability to deliver, which is going to inherently be hard for us to keep up with on the recycling side. So I think we target that, I talk about this sometimes, you hear me say, we think in scales of very long time friends here, but I think it would take us, frankly, out for maybe 100 or 200 years to fully hit, like a higher than maybe 85% or 90% full reliance on recycling, but in the near term, we try to get those numbers close to 50-50 as soon as we can. A lot of that's just going to be dictated by growth on the recycling front as well as growth on the order book.

And Jake, just to prove I'm listening when you talk about it, the other thing that excites me about recycling is not only what it can do around our supply chain for fuel and our price of fuel, but that process itself throws off some great co-products, some isotopes that are very high and ever increasing demand in the medical industry, in the aerospace industry. So there's potential, we have business within that business as we develop it.

And that will conclude questions altogether. I'll turn the conference back to Jake for any additional or closing comments.

Great, well, thank you everyone for joining us today. We appreciate the attention, the time, the thoughtfulness around the questions. We're excited about these continuing, keeping you guys up to date as we proceed forward on executing against our plans and march forward getting our first plant built, getting recycling scaled up, delivering and growing our order book, all the cool things that are going to be coming for us. At the end of the day, one of the things that motivates us here and me specifically at Oklo, it's pretty easy to get really excited about is what the fundamental technology affords us the ability to do. Fast reactors have significant economic upside, significant fuel efficiency benefits that coupled with recycling, all of which demonstrated technology, truly has the potential to be a terminal energy and climate solution. In other words, you have a technology set that's been demonstrated and proven that we now have the opportunity to scale forward that can tap into reserves of heavy metals on this planet and power the entire planet's energy needs for the rest of the planet's durable lifetime. That's a pretty exciting thing to be motivated to work, or exciting thing to get to work on, pretty easy to get motivated to work on. So we're very excited about being a public company now, looking forward to keeping you all up to date as we progress towards our goal and our mission here and look forward to the next one of these. Thank you all.

Thank you. That does conclude today's program. Thank you for your participation. You may disconnect at this time.