Welcome to the Applied Materials Earnings Conference Call. During the presentation, all participants will be in a listen-only mode. Afterwards, you will be invited to participate in a question-and answer-session. I would now like to turn the conference over to Michael Sullivan, Corporate Vice President. Please go ahead, sir.

Good afternoon. We appreciate you joining us for our first quarter of fiscal 2019 earnings call, which is being recorded. Joining me are Gary Dickerson, our President and CEO; and Dan Durn, our Chief Financial Officer. Before we begin, let me remind you that today's call contains forward-looking statements, including Applied’s current view of its industries, performance, products, share positions and business outlook. These statements are subject to risks and uncertainties that could cause actual results to differ materially, and are not guarantees of future performance. Information concerning these risks and uncertainties is contained in Applied's most recent Form 10-K and 8-K filings with the SEC. All forward-looking statements are based on management's estimates, projections and assumptions as of February 14, 2019, and Applied assumes no obligation to update them. Today's call also includes non-GAAP financial measures. Reconciliations to GAAP measures are contained in today's earnings press release and in our reconciliation slides, which are available on the Investor Relations page of our website at appliedmaterials.com. And now, I'd like to turn the call over to Gary Dickerson.

Thanks, Mike. In our first fiscal quarter of 2019, Applied Materials delivered solid results in a challenging business environment. Over the past two months, we have become increasingly cautious about near-term macroeconomic risks and have seen further pullback in customers’ investments. At the same time, we remain highly optimistic about the long-term. Powerful new growth drivers for the semiconductor and display industries are emerging, and we see tremendous opportunities for the Company ahead. While we’re taking appropriate actions to navigate current market dynamics, we are not losing focus on the bigger picture. We’re making strategic investments in new technology, products and capabilities that will position Applied to play a bigger and broader role in the future. In today's call, I'll start by providing more details about our outlook for the year ahead; then, I'll talk about the future growth drivers that are reshaping our industry; and I will finish by describing Applied’s strategy and highlight some recent accomplishments and milestones. Let me begin with the near-term environment and our current perspective on 2019. In the past quarter, there's been more negative than positive news with the whole industry facing challenges, which include macro conditions in emerging markets that have weakened; smartphone demand falling short of expectations, particularly for high-end models which have more semiconductor content; and DRAM prices, which have declined as inventory levels build. On the positive side, we've also observed that NAND inventories are coming down from very high levels seen in the fall, although they remain above normal levels. Fundamental dynamics in the memory market are healthy with very-disciplined investment in new capacity and a strong commitment to advance the technology roadmap. And, looking more broadly at semiconductor capital investment, it’s important to note that we are in a period of market transition and diversification. For the past several years, smartphones drove the majority of wafer fab equipment spending. This year, more than half of customers’ investments will be driven by other categories as new growth drivers, including cloud data centers, IoT devices, 5G and automotive applications gain momentum. When we take all these factors into account, we see the following implications for Applied’s served markets. Based on recent public comments by our customers, NAND bit demand is expected to grow in the mid-30% range this year and DRAM bit demand in the mid to high teens. As result, we believe that investment by memory customers will be down substantially in 2019. However, we also expect channel inventory levels to normalize as the year progresses, creating a more favorable setup for 2020. In foundry logic, we see investment being flat to slightly up year-on-year, but we expect a higher portion of the spending to be directed towards long lead time equipment, specifically EUV lithography. While this represents a market share headwind for Applied in both 2018 and 2019, it’s also a positive indicator of customers’ future investment in leading-edge process tools. Overall, we believe that wafer fab equipment spending in 2019 will be down mid to high teens on a percentage basis versus last year. In display, weakness in emerging markets is also impacting the timing of customers’ investment plans. We see some TV factory projects pushing out of year and into 2020. As a result, we now believe our display equipment revenue in 2019 will decline by about a third from 2018's record levels. We also expect revenue in the second fiscal quarter to be significantly lower than our average run rate for the year. Over the longer term, we believe the display market remains attractive as the industry is going through several large technology transitions as larger substrates are introduced in TV manufacturing, rigid OLED adoption increases in smartphones and expands to other applications and initial flexible OLED products get closer to release. These inflections create important growth opportunities for Applied over the next several years. While we’re paying close attention to current headwinds and driving efficiencies across the Company, we remain focused on our long-term opportunities. I strongly believe that in the future, technology will play a larger part in many areas of our lives. Entire industries will be transformed by artificial intelligence, big data and Industry 4.0. And at the foundation of those transformations are semiconductors. We're moving beyond a world of general purpose computing to specialized solutions that address new types of applications and workloads in the cloud and at the edge. And while the need for semiconductor innovation has never been greater, classic Moore's law scaling is challenged. Simply shrinking transistors no longer delivers simultaneous improvements in the power, performance and cost of chips. As I’ve said before, to unlock the full potential of AI and big data, we need a new playbook for semi conductor design and manufacturing, which will include new architectures, new 3D techniques, novel materials, new ways to shrink transistors and advanced packaging techniques, all five of these areas required major advances in materials engineering and create tremendous opportunities for Applied Materials. To enable this playbook and accelerate innovation for our customers, we are making investments in new capabilities, creating entirely new types of products and extending our engagements across the ecosystem. For example, we recently announced that we are expanding our longstanding technology partnership with IBM as a member of their new AI hardware center. We’re also making good progress with our new materials engineering technology accelerator, which is on track to open later this year. The META Center will support deeper collaborations with system architects, chip designers and the manufacturing community. In addition to broadening our participation in the AI big data inflection, we’re also building a more resilient company with diversified revenue streams. The portion of our revenue generated from sources other than new 300 millimeters semiconductor equipment sales is increasing. Combined, we expect our services, spares, upgrades, consulting, software and display and flexible technology businesses to represent about 45% of total sales this year. In Applied Global Services, our progress is fueled by a growing installed base and new advanced service products that help customers shorten ramp times, improve device performance and yield, and optimize operating costs. We grew AGS revenue more than 20% in fiscal 2018, and we anticipate high single digit growth this year, even with wafer fab equipment spending expected to be down significantly. One reason for this is that more than half our service and spares business now comes from subscription type revenues in the form of long-term service agreements. Before I turn the call over to Dan, I'll quickly summarize. Given the elevated macro risks and a challenging environment in both the memory and display markets, our near-term outlook is one of caution. Despite these headwinds in 2019, we remain highly optimistic about the future. While we are taking steps to ensure our spending is aligned with short-term market conditions, we’re focusing our investments on long-term opportunities. We’re driving innovative new product development and building new capabilities that position Applied to play a bigger and broader role in the industry over the coming years. Now, Dan will provide his perspective on our performance and outlook.

Thanks, Gary. Today, I will outline our financial strategy in the current environment, then summarize our Q1 financial results, provide our Q2 business outlook and give you an update on our new META Center in New York. As Gary outlined, the end markets that our customers serve, weakened during the quarter. As a result, our semi equipment customers are taking proactive steps to carefully manage capacity additions and reduce inventories. This sets the industry up well for 2020 and beyond. We continue to expect the recovery to be shallow and gradual, and we’re still not ready to call the bottom of the current cycle. At the same time, it's important to put this year’s spending into context. Our WFE forecast for 2019 is still billions of dollars higher than the peaks of all the prior cycles. Today, our backlog remains healthy, our profitability is solid, we’re generating strong free cash flow, and we’re returning cash to shareholders. Most importantly, we see significant opportunities ahead. And we have the resources to make disciplined investments to secure technology leadership and growth. Our strategy is to navigate the current environment by carefully managing our overall expenses, fully funding our new product pipeline and maximizing our recurring revenue. Here are some specific examples. First, expense control. Our Q1 non GAAP OpEx was $750 million, including savings from our holiday shutdown and only one month of our annual merit increase. In Q2, absent these same benefits, we’re guiding our overall OpEx to be approximately flat sequentially. Next, R&D funding. Even in the current environment, we’re investing more in R&D to strengthen and grow our new technology and product pipeline. Gary described how the industry needs new architectures and materials to enable better chips for AI. Later this year, we plan to introduce materials engineering solutions designed to accelerate the adoption of the next generation of memory chips, which will be highly enabling the cloud computing and the Internet of things. Third, recurring revenue. Gary described our services revenue should be higher in 2019, even as WFE declines. We expect the transactional portion of our AGS revenue to grow more slowly this year as our customers work down excess inventories, but the subscription part of AGS should be higher year-over-year. In fact, in 2018, we grew the number of tools under comprehensive service agreements at 3 times the rate of new system shipments. So, we’re doing a good job of delivering ongoing value of our customers across a larger portion of our installed base, which is the largest in the industry. Next, I'll summarize our quarterly results. As a reminder, Applied adopted the ASC 606 standard for revenue recognition this quarter, using the full retrospective approach. Bear in mind, the differences between revenue recognized under ASC 606 and the old standard will fluctuate from quarter-to-quarter, but over time, they will offset each other and the cumulative difference will be minimal. As we expected, the adoption of ASC 606 had a minimal cumulative impact on the Company, increasing our retained earnings by about $6 million. Now, to the results. In Q1, we delivered revenue that was slightly above the midpoint of guidance. Our non-GAAP gross margin and operating expenses were at the midpoint of guidance. We generated non-GAAP earnings of $0.81, which was $0.02 above the midpoint, including the impact of a slightly higher tax rate. Turning to the segments. Semiconductor Systems revenue was $2.27 billion and about 1 percentage point above the midpoint of our outlook. SSG’s non-GAAP operating margin was 28.3%. Global Services revenue was $962 million and 2 points above the midpoint of our guidance. AGS non-GAAP operating margin was 29.6%. Display revenue was $507 million and 1 point above the midpoint of our guidance. The Group’s non-GAAP operating margin was 23.3%. Turning to the balance sheet. We generated operating cash flow of $834 million or 22% of sales. We returned $942 million to shareholders including $750 million in buybacks. We ended the quarter with $5.3 billion in cash and investments, and $3.6 billion remaining in our buyback authorization. Next, I’ll provide our Q2 guidance. We expect Company revenue to be approximately $3.48 billion, plus or minus $150 million. Within the outlook, we expect silicon systems revenue to be in the range of $2.15 billion, plus or minus $100 million. Services revenue should be $970 million, plus or minus $25 million. Our Display revenue should be in the range of $340 million, plus or minus $25 million. We expect non-GAAP gross margins of around 43.5% and non-GAAP OpEx of around $750 million, plus or minus $10 million. Non-GAAP earnings should be in the range of $0.62 to $0.70 per share. And our current non-GAAP tax rate expectation is approximately 14%. This is about 2 percentage points higher than our initial expectation for 2019. We've raised our rate expectation primarily to reflect the potential impact of new regulations proposed by the Treasury Department along with our latest forecast for geographic revenue mix. Now, I will close with an update on the R&D capabilities we’re creating at our META Center in upstate New York. Over the past quarter, we received approvals needed to begin receiving $250 million in public funding, which is being used to purchase and install Applied Materials systems and other equipment. We've now shipped our first systems to the META Center, which will be one of the most advanced R&D centers in the world. We’re already engaged with multiple customers to accelerate breakthroughs in semiconductor technology along with new applications of our materials engineering capabilities, and we’re on track to be running wafers in the second half of the year. Now, Mike, let’s begin the Q&A.

Thanks, Dan. Now, to help us reach as many of you as we can, please ask just one question at this time. If you have an additional question later, please pull the operator, and we'll do our best to answer it later in the call. Operator, let's please begin.

[Operator Instructions] And our first question is from C.J. Muse from Evercore. Your line is now open. C.J. Muse: I guess, two-part question. In terms of your overall guide by segment, it looks like you’re suggesting roughly $3.55 billion a quarter in revenues. And I guess, is that math kind of in the ballpark of what you’re thinking? And then, more importantly, how are you thinking about gross margin trajectory as we go through the year on the changing mix?

Thanks, C.J. Can I get you to repeat your first question? I didn’t quite understand where you're going. The second part of the question is, as we look sequentially into Q2, you see the gross margin guide. Off of those levels into the back half of our fiscal year, we would expect to see incremental improvement into Q3 and then step up again into Q4. But, I apologize. I didn’t catch the first part of your question. C.J. Muse: It was just adding up the different segment guide, and is it fair to say that roughly $3.55 billion is kind of what you’re seeing on average on a quarterly basis for revenues through the calendar year?

Yes. So, I don't think on this call, we’ll be guiding for the full year. But, what we do see in the Q2 is $3.48 billion for the overall Company revenue, plus or minus $150 million.

Our next question is from Atif Malik from Citi. Your line is now open.

A two-part question for me as well. First, Gary, could you just talk about what should we expect display mix between LCD and OLED this year? And then, is there any change to your view on the capital intensity of OLED TVs into next year as some of the LCD makers are converting the LCD line to quantum dot and other flavors of OLED? And then, I have a follow-up for Dan.

Okay. Thanks for the question. Let me give you some overall color on the display business. And hopefully, I'll cover the two questions that you have. In the six years through 2018, we were able to grow the display business at a compound annual growth rate of around 25% to $2.5 billion last year. In 2019, we signaled incremental weakness on the last call. And the market has continued to weaken since that call. We now believe that the market is down around a third from 2018’s record levels with second quarter -- our second quarter to be significantly lower than our projected average run rate for 2019 and 2020. Relative to the mix on -- what we have is the biggest incremental change since the last call as weakness in TV, delays in TV investments. It’s still compelling for customers to go to Gen 10.5 panels because you can produce eight 65-inch TVs versus three on Gen 8.5. So, it’s strategically important for them to go and make that transition. But, the timing of the investments are being pushed out. And then, going into 2020, we see small improvement in 2020. And we defiantly like the longer-term technology trends and opportunities to grow the business. So, hopefully that gives you some indication around mix. The biggest difference from our last call is in TV market.

Thank you. Our next question is from Toshiya Hari from Goldman Sachs. Your line is now open.

Gary, you talked about the EUV headwind and the impact it had on your market share in 2018, and your expectations for 2019. Should we be concerned that it could remain a headwind into 2020 and beyond or is there sort of initial ramp-up of EUV that’s causing some of these issues for you? Thank you.

Yes. I think if you look at overall market share, third-party data is going to come out in a little over a month. We will all see the numbers, including our share. One thing that we’ll see is that in the six years going into 2017, we were the only major supplier to be up or flat for six consecutive years. And certainly, what we said in ‘18 is that our share will be down, demand softened in the back half of the year; we saw push out to NAND, reuse in foundry. And overall spending mix shifted towards litho and areas we don't compete. What you will see in about a month is gains in areas like implant, epi, etch, gaining momentum in packaging. And also in our process control business, I’m happy about the progress there. We had a record year. Very strong growth in our e-beam technologies. We may end up being number one in e-beam for the first time ever, and very well positioned with the additional adoptions of new products in ‘19. In ‘18 and ‘19, logic customers are buying EUV systems. And those systems have very long lead times. They are buying the EUV tools years before they go into high-volume manufacturing. We look at that as a positive indicator in the adoption of future nodes. But certainly, right now, in ‘18 and ‘19, it's definitely a headwind. And as we go forward as NAND spending resumes, that's more material spending versus litho spending. That's certainly good for us. The trailing nodes are also not litho dependent. So, that's also going to be good going forward. And then, another factor in ‘19 that’s more favorable setup for us, we have balanced share in foundry logic and memory. So, in a year where DRAM and NAND are much weaker, the relative set-up for us is better in 2019. And then, what we’ve talked about is over the longer term, we see a very different picture emerging. It’s clear, the industry needs a new playbook that goes beyond 2D scaling. And I deeply believe Applied is in the best position to enable the playbook. I meet all the time with customers, the leaders of R&D for our top customers on a monthly basis. And this is a big focus for all of those customers. We’ve talked about five drivers of power, performance and area and cost as to 2D scaling slows, and all of those are dependent on breakthroughs in materials engineering. So, I would say longer term, that creates a great opportunity for us. Dan talked about in his prepared remarks new memory technology for AI that's coming later this year; I’ve talked about a 1,000x improvement in leakage current that improves power efficiency. Those are just early examples of the new playbook, extensive playbook that we've developed. And then, we've also talked about speeding up the new playbook by opening the META Center and figuring out how to integrate all this together, so customers can move it into their fabs. I definitely believe the right vision for the industry is material to systems 10 times faster, driving this new playbook. There's never been a time where it's more important. So, that’s the playbook on how we’re going to move the needle for the industry and for Applied.

Thank you. Our next question is from John Pitzer from Credit Suisse. Your line is now open.

Garry, as always, I appreciate all the detail you gave in your prepared comments. One of the things you mentioned is just the expectation that memory will be down significantly this year in calendar year ‘19, which really shouldn’t be a surprise to anybody. I was wondering if you could just help us understand how your views differ between NAND and DRAM CapEx for this year, and whether or not you see either recovering in the back half of the calendar year? And I guess importantly, could you talk a little bit about what happens to your SAM in NAND as the industry transitions from 64 to 96 layers?

So, thanks for the question. Let me take first the market opportunity for us. There is no question as customers increase the number of layers, it's all about materials intensity. And so, that creates a tremendous opportunity for us. We grew market share in memory a significant amount over the last five years. A lot of the improvements around new materials, new technologies that drive that scaling are really great opportunities for Applied. We are increasing our etch share also in memory. So, that's also a very good setup for us. So, certainly, as the scaling goes forward, we expect that we’re going to continue to grow our share, as we've done over the last several years. And maybe Dan, you can answer the question about DRAM versus NAND.

Sure. Thanks, Gary. And John, to get to how 2019 is profiling in the memory space, let me start with what we saw in 2018 and use that as a jumping off point to make some comparative statements about how we see the market profiling in 2019. We’ll probably not going to be point specific on how 2018 ended up because Gartner’s going to come out in a month or two with those estimates. But, we definitely saw 2018 up over ‘17, definitely has a 5 handle on it. And as you indicated, it was a strong memory growth year. We think as 2018 settled, 60% of the spend in the market was memory related, 40% -- about 40% was foundry logic related. Within memory, we saw the NAND DRAM spend very balanced. As we look forward into 2019 and Gary’s prepared comments, he said, year-over-year, WFE in ‘19 will be down. Memory will be down by a good amount. We expect foundry logic to be flat to up a little bit. So, as 2019 shakes out, we expect foundry logic to be greater than memory. Overall, the market will be down mid to high teens. And as we look at the market between NAND and DRAM, we see it profiling very similar to ‘18 and being balanced. In terms of the second half and come back in the market. I think, we want to set expectations for a slow, gradual recovery off of these levels. While we're having conversations with customers and we see positive lead indicators, we think it's prudent in this environment to set those expectations for a slow, gradual recovery. As we look into the back half of the year, inventory levels come down faster than we expect, utilizations come up and price stability, those would all create the environmentals for a more robust second half. And if that scenario materializes, then we would benefit significantly from that environment. And then, I wanted to come back to C.J.'s original question, because now I think I understand a bit of what he was asking for. And I apologize, C.J. Let me help shape the revenues this year to I think get at the question you were asking. Off of the levels we guided in Q2, we see our Semi Systems Group flattish on a quarterly basis into the back part of the year. The run rate of our Display business in Q2 will be below the annual average. So, we would see -- expect to see that growing into the back part of the year. And then, AGS will have its normal seasonal profile and be higher into Q3 and Q4. So, hopefully, that helps giving you a bit of a profile and color. And then, the gross margin part of your question again, we expected that to incrementally step up in Q3 and again into Q4.

Our next question is from Harlan Sur from JP Morgan. Your line is now open.

Can you just help us understand how you’re thinking about the OpEx trajectory beyond Q2, if you do start to see gradual recovery as you describe it? And then, on the other hand, if revenues were to take another step down, let’s say beyond Q2, how much could the team flex their OpEx?

So, OpEx is definitely a controllable spend line. The philosophy we have at the Company is, is we’re going to be an inflection-focused growth company. We’re going to grow organically and invest in products and capabilities that will help drive that growth going forward. We do it in the context of the environment we operate in. We will be disciplined operators and instill spend discipline throughout the Company. As you take a look at the guide into Q2, what I would expect, if you take a step back and think about where we were a quarter or two ago, we had said we spend about $3 billion in OpEx in 2018, we would expect that to grow by about $200 million into ‘19. We've adjusted those plans in light of the current environment we’re in and will probably bring that down by about $175 million over the course of 2019 off of the original expectations. So, up 1 percent, maybe 1.5% off of the levels we were in 2018. And we think this strikes the right balance, giving everything we know between near-term discipline that reflects the environment we operate in and strong pursuit of new technologies, new platforms, new winning products that will preserve shareholder value creation into the inflections that we see materializing in the years ahead.

Our next question is from Pierre Ferragu from New Street Research. Your line is now open.

I just wanted come back to the point you make Gary about EUV being like a share gainer against you this year but the leading indicator for you going forward. So, how much visibility did you have at this point in time on when you EUV gets introduced in mass manufacturing, how the share I would say of AMAT of spending wafer is evolving? So, that’s one question. And then, the second question is, how much of the benefit you see on the back of EUV is just more of what you do already, and how much is actually new technology you’re going to introduce as well, things like cobalt interconnect and others?

So, EUV, as I’ve talked about, you’re seeing early adoption in 2018 and 2019. And in 2019, you’re going to see the first ships being built. So, you have pilot production in -- when you’re adopting the new technology like this, it happens years before you go into high-volume manufacturing. So, you see this initial adoption surge in advance of a high-volume manufacturing. And so, again, we do see that as a good leading indicator relative to N5 for instance, when that happens. Now, one thing also to remember is that EUV will remove legacy etch and dep steps. I mean, that’s why customers are adopting EUV because it replaces a number of different etch steps, but those aren’t our steps. So, at every node, the most important thing for the customers is they have to drive power, performance and area and cost. And definitely with power and performance 2D scaling helps, but even more important is innovation in material. So, if you look at a node like N5 for instance, there are many materials inflections that are being adopted as customers drive improvements in power and performance. We have a number of different new steps there advanced metal gate material, epi steps, we have hot and cold implant going from 500 degree C to minus 140, new surface treatments. We’re increasing our share in etch steps and have good momentum in new process control solutions. So, that is what will come four us. But what you see right now is this early adoption of EUV as customers prepare for those higher volume ramps. What I will also say, and I’ve talked about this many times is I do believe that the industry needs a new playbook. We have stronger and deeper engagements than we've ever had with customers. So, that really positions us well. Relative to N5, we’re well-positioned. We have deep engagements with customers are to drive power and performance on N5 and also for future nodes. And just the last thing I would add, when we talk about EUV adoption, the majority of the EUV is really in leading-edge technology and logic foundry. You have half the market that’s memory that’s driven by materials; you’ve got about 25% of the market that’s specialty nodes, power devices, image sensors, which also are great opportunity for us. So, we see about 75% of market really great opportunities. And the leading edge foundry and logic is really about power and performance in addition to 2D scaling. And we’re in the best position to drive that with our customers going forward.

Thank you. Our next question is from Krish Sankar from Cowen. Your line is now open.

This is Steve [ph] calling on behalf of Krish. First one, if I could, Gary, on your Semi Systems business as it relates to China, fully appreciate the ongoing U.S. China trade tension, and also given that there is that -- the one export control on one of your DRAM customers in China. I was wondering if you have seen any spillover effects from trade tensions and control as some of your other customers, whether it’s in terms of pushout in any ramp schedules or perhaps even -- any increased focus or sourcing tools from local Chinese vendors -- by your Chinese customers as well?

Yes. Thanks for the question. So, relative to China, from what we see today, it feels like mostly business as usual with our customers in the region. We’re very well-positioned in China with domestic and multinational customers. We've been in China for 35 years, very deep relationships across semi and display. Just a little bit of color on China. We expect China wafer fab equipment investment to be down year-over-year in ‘19 versus ‘18. And we see both domestic and multinational down in China. In China domestic, we see higher spending on foundry logic versus memory with foundry logic focused on trailing nodes, for sensors, IoT, those types of devices. Within China domestic spending, we’re in a great position and we expect that we’re going to gain share. And then, also our Display business in China will be down, in line with our overall global Display forecast. So, overall, we have a super strong position in China, Semi Service, Display, great teams, strong relationship and feel good about how we’re positioned going forward.

If I could ask quick follow-up on 200 millimeter equipment demand. I think number of foundries globally have talked about 8-inch wafer fab initiatives focused specifically on IoT, automotive opportunities in the future. Is that something that will help equipment demand later this year? And should we expect to see those benefits on the systems side or on the AGS side? Thanks.

Thanks for the question, Steve. The trailing node geometries in general have been profiling very strong for the last couple of years, and 200 millimeter equipment demand is also the same. We continue to expect a healthy outlook for those mature nodes going forward. And the 200 millimeter equipment demand remains strong. Like you said, IoT sensors are proliferating and driving significant demand at those mature nodes. I would also say that there are new AI chip architectures that are being designed at the 28 nanometer node, and they are going to deliver high performance. But to get the same transistor count out into the market as the 7 nanometer node, you need 8 times of the wafer at 28 nanometer. So, the fact that we’re getting new designs of highly capable silicon at nodes like 28 nanometers, I think bodes well for the trialing node market. 200 millimeter is experiencing the same type of dynamic and continues to be strong. From a financial reporting standpoint, we report our 200 millimeter equipment segment as part of our services, AGS reporting segment.

Thank you. Our next question is from Timothy Arcuri from UBS. Your line is now open.

I had two questions. Dan, I guess, the first one is, I’m looking at the gross margins guidance, 43.5; it’s about the same as you were doing on like $1 billion lower revenue, sort of in mid-2016. So, my first question is, I’m just kind of wondering why gross margin gains are not really dropping through over that period. Is that because a lot of the incremental revenue is coming on the services side? And then, I have a follow-up. Thanks.

Thanks, Tim. As we talked about historically, gross margin is going to be a function of a number of factors. There is an aggregate revenue component; there is mix between our segments and then product mix within segments as well as overall activity levels in the factory, and they will vary from quarter to quarter. As we take a look at our guide into Q2, when we compare it to peak quarter, about a year ago, we’re profiling favorably relative to our peers in the industry. And so, the Company we think is doing a good job in a difficult environment, given the parameters we talked about that influence gross margin and we’re profiling I think favorably relative to peers in the industry, given that peak comparison. And you had a follow-up question, Tim.

I did. And yes, I’m just trying to understand the change in the model. I think, you said maybe six or some months ago before WFE fell off, I think the feeling was that you would do roughly 3.25 annualized at 40 billion WFE. We’re sort of even a little bit above that right, we’re probably a 41 or 42. But even if you say we’re at 40, you’re sort of -- based on the guidance, you’re at roughly 2.65 a year annualized. So, that's roughly 20% below where you thought, so pretty big number. I’m just wondering, sort of what’s changed. Thanks.

So, here is what I would share with you and what we see. In the November quarter, we noted that 2019 was going to shape up a lot like 2017, and that would give us an earnings per share a bit above $3.25. And since then, we’ve seen pre-announcements by end customers, one company in the smartphones space, another one in the GPU, and cryptocurrency continues to be weak. So, we've taken customer spending down in semi and display. And if you layer in what Gary said, down mid to high teens on a year-over-year basis, clearly, WFE spend is now below the levels we saw in 2017. So, my expectation is, is that earnings not surprisingly will be lower than they were in 2017. But, I do like the way the customers are taking proactive steps to get supply in balance with demand, work down inventories in both memory and the logic foundry space. So, I see the setup into 2020 as being quite good.

Our next question is from Vivek Arya from Bank of America. Your line is now open.

A classification and a question. On the clarification, Dan, I was hoping you could give us some more color around the subscription versus transactional mix in AGS. So, let us predict how sensitive that business is to WFE versus your increasing base of deployed tools. And then, the question is, if I look at WFE over longer period of time, it was in the low to mid 30s for many years and then in ‘17 and ‘18 it jumped well above that trend to 50 billion plus. And now, this year, they are in the low 40 billion. What I’m trying to understand is, what is the right base line level that when we have let’s 2020 as normal -- quote unquote normal year, do we grow off of the low 40s that we’re right now or do we grow off 50s? How do you conceptually think about modeling WFE growth over the next three to five years?

Yes. Thanks for the question. I'll start with the subscription question and then turn it over to Dan. So, overall, our service business has grown about 15% compound annual growth rate over the last four years. In 2018, we grew over 20%. What I said in the prepared remarks is we see high single-digit growth in 2019 in a soft market. And part of what helps us is exactly what you talked about is this subscription revenue. We have a higher percentage over half of our business in subscription revenue with long-term agreements. And so, when you’re in a soft market, those long-term agreements versus just selling parts makes a very, very big difference. That’s been a conscious strategy on our part to create value for customers, drive more of these comprehensive service agreements. If you look at 2018, the comprehensive service agreements grew three times faster than the rate of new shipments. So, we have -- we really changed that strategy around five years ago, relative to driving more long-term agreement, subscription type revenue, and even in 2018, it's still growing at a very high rate. It really comes back to creating value for customers, optimizing output, yield, cost. We’ve put a tremendous focus there. And again, we’re getting a lot of traction. So, it’s good for us, and also definitely good for our customers. And I'll turn it over to Dan for the next question.

Yes. And Vivek, on the second part of your question, I think there is a couple of ways to look at it. If we take a longer-term perspective around WFE and we look at it as a percentage of overall semiconductor revenue and you go back to couple of decades, 2000, WFE as a percentage of semiconductor revenues was about 17%. This was a bit of a peak because our customers were investing in both 200 and 300 millimeter systems. And then, over the course of the next decade as 300 millimeter cut in all the factory automation systems and the way our customers consolidated and became more efficient in operating their footprint of capacity, you saw it come down to about 9% in 2013. Now that all the efficiency gains from 300 millimeter have worked their way through the system, 450 millimeters is not on the roadmap, in the last few years since 2013, that WFE intensity has gone to 11% to 12%. In an environment characterized like we’re in now where we see elevated inventory levels on both the foundry logic side as well as the memory side, and our customers managing in a very disciplined way supply to meet end market demand, we see those inventories come down. And so, I think it's a good set up for 2020. But, I don't think what happens to this year forms the baseline because we do think what's happening this year is shipping below true end market demand as these inventories come down.

Thank you. Our next question comes from Joe Moore from ‎Morgan Stanley. Your line is now open.

I wanted to follow up on the comment that you made about China spending being down and being little bit foundry oriented. There still seems to be quite a bit of desire to build a sovereign memory business and we’ve seen a number of players talk about spending large amounts of money. What do you think it has to -- it's going to take to sort of kick start that effort, and is it a function of the technology being production ready, is it a function of the market environment, creating new spaces, what's the gating factor behind that business starting to grow?

Memory technology, I think, you can see in terms of the 3D NAND ramp is very difficult. Companies that have decades of experience, tremendous technology, deep experience, talent, I mean, those customers had difficulty transitioning from 2D to 3D NAND. And certainly DRAM scaling is extremely difficult right now. So, it just takes a lot of time to build that type of technology base. And you’ll also need experienced talent across many, many different types of the skill set. So, what we said before in terms of China is that China will definitely continue to incrementally spend but it’s going to be years before you see -- if you look at cost for bit, any type of competitiveness on the leading edge is going to take a lot of time to develop the technology, to develop the talent. And in the meantime, again in the foundry logic area, there is a tremendous growth in sensors, IoT, trailing edge technologies. And we see rational spending there ramping in China. And again that's the more of the spending in 2019. So, again, we see increases but as we said before, we don't see a hockey stick. It’s going to take many years to build the talent and technology.

Thanks, Joe. And operator, I think we have time for two more questions.

Thank you. Our next question is from Patrick Ho from Stifel. Your line is now open.

Gary, maybe just following up some of the commentary you’ve made about EUV on this conference call, particularly for the leading edge foundry and the increasing litho intensity in the near term. At the same time, as these leading edge nodes shrink to 10, 7 and 5 nanometers, we’re seeing new materials implementation, stuff like cobalt for interconnects and other new processes being brought on board. Can you discuss a little more specifically Applied Materials capital intensity for its class of segment that even with EUV you will continue to see increases for your business segments on a going forward basis for leading edge logic and foundry?

Yes. Thanks, Patrick. As I said earlier on N5 -- really for all the customers, every now they are driving power, performance, area and cost. 2D scaling is one of the ways that they are driving those improvements. And certainly shrinking is part of that; pattern placement techniques to place patterns in the right location are also part of that where we've said before we expect our patterning revenue to grow, we've grown significantly over to last several years. We do still see, if you look across the whole industry, our patterning share to continue to grow for Applied Materials. And then for power and performance, some of the things, I talked about earlier in N5, gate materials, epi, implant, surface treatment technologies. I will tell you, the interfaces are getting very, very difficult. And so, when you look at how you improve power and performance, you’re talking about a few atoms making a very big difference. In some cases, you take wafers out of one process chamber immediately in a matter of seconds or minutes, you have moisture being absorbed into the films, oxidizing; that impacts device performance. So, more of these integrated materials solutions will be the path in terms of how people drive scaling going forward. The 1,000x leakage current example I’ve given is I think a prime example of a huge improvement in power and performance, and that requires a combination of technologies on a platform where Applied has a significant advantage. So, those are the areas we’re focused on. We have many deep conversations with a number of different companies. I meet on a regular basis with all of the R&D leaders. And really, that's the focus for us and creates a big opportunity.

Thank you. Our last question is from Quinn Bolton from Needham and Company. Your line is now open.

Gary, I just wanted to follow up on the market share comments. Obviously, the mix shift towards EUV hurt supply. But, if you look at the segments in which you compete today, what are your expectations for share gains? Are you flat to still gaining share in those segments? And then, sort of second question is just -- you talked about in the script, you are not yet ready to call the bottom. Just curious, what signs are you looking for before you're ready to call the bottom -- on the semiconductor side?

Yes. On the semiconductor cycle and calling the bottom, I think what we're looking to in the back part of the year, we've got conversations, deep conversations ongoing with customers. And while we like some of the positive lead indicators we’re seeing, we still see inventory at an elevated level coming down. And if we were to see that come down faster than we’re currently contemplating, utilizations rising, ASP stability, I think those would be all good lead indicators that would look into the back half of 2019 and change the trend lines that we see. And again, if that is the scenario that materializes, we will benefit greatly in that environment.

I think, on the market share question, certainly we’re doing well in the areas we’re competing. But we’re driving to compete in more areas. There are certain areas where there are big TAM expansion opportunities. Those are areas that we’re very focused on. And we’ve talked many times about inflection-focused innovation. There is no question the playbook is changing going forward. It's not all about to 2D scaling. So, whether it's in advanced logic, specialty nodes, like power devices, CMOS, image sensors or scaling new memory technologies, all of those areas are areas that we’re very focused on. They are all dependent on materials innovation. And we’re driving major investments in those new products and also new structures that enable that new playbook. So, that's a big focus for us, and we see it is a great opportunity.

Okay. Thanks, Quinn. Any last thoughts, Dan, before we close it up?

Sure, Mike. Thanks. Just a couple of quick thoughts. First, I want you to know that while the environment is challenging, we feel very good about the structural WFE growth that we see in the years ahead. So, today, we’re going to do the right things that increase the value of the Company. We will drive spend discipline throughout the organization while we’re still investing. We're going to invest in new products and new capabilities. This is about winning, winning in new inflections that we know are going to play out in the growth years we see coming. Second, even though we see some positive lead indicators based on conversations with our customers, we will resist the temptation to call the bottom. What we will do though we’re going to stay close to our customers, we’re going to continue to be transparent; we’re going to continue to be available to you. On that point, we've got the Morgan Stanley conference coming up in a little less than two weeks. I’ll look forward to seeing many of you there, and both Gary and I at many other events throughout the rest of the year. Okay. Mike, let's go ahead and close the call.

Okay, great. Thanks, Dan. And we’d like to thank everybody for joining us today. The replay of the call is going to be available on our website by 5 p.m. Pacific Time. Thank you for your continued interest in Applied Materials.

Ladies and gentlemen, thank you for your participation in today’s conference. This concludes the program. You may now disconnect.